Question description
Task 1 You are required to insert here the pin diagram and pin details of a medium scale digital component assigned to you. Pin details of all the pins except Vcc and ground of a digital component should be clearly explained briefly. No additional explanation other than pin details are required. Pin details and operation of the digital component need to be discussed in the beginning during the demonstration of the assignment. Task 2 You are required to produce and insert here the VHDL code for a medium scale digital component assigned to you. It should be commented to explain details of operation. No additional commentary other than comments in the code will be marked. Include evidence, copied from the VHDL design tool that the code compiles without errors. Title: 7485- 4 bit Magnitude comparator behavioral and structural modeling Task 3 You are required to produce and insert here the VHDL code for your test bench to apply all possible stimuli to the design under test. It should be commented to explain details of operation. No additional commentary other than comments in the code will be marked. Include evidence, copied from the VHDL design tool that the test bench compiles without errors. Task 4 You are required to insert here a waveform diagram from the VHDL design tool to illustrate that the model works correctly. Annotate comments on the waveform to explain significant features. If you just supply a waveform without annotations marks will be deducted. Conciseness is important and ideally you will show your simulation on a single A4 page (landscape format suggested). Simulations longer than 3 A4 pages will not be marked. No commentary other than the annotations on the waveform will be marked. It is not necessary to provide an exhaustive test. The simulation should simply illustrate the main operating functions of the device. Take care when converting images to pdf format that the details of your simulation are clearly visible in the pdf document. Task-5 You are required to implement the system and demonstrate the results of the design on the Altera DE2-115 target board with proper explanation and answering the questions raised by the instructor.
